Agilent/Keysight

Sort By:  
Pre-used in good condition.
$7,500.00
Pre-used item in good condition.
$4,000.00
Pre-used item in good condition.
$4,000.00
Pre-used item in good condition.
$7,500.00
Pre-owned item in good condition.
$4,000.00
Agilent 86106B 10Gb/s Reference Receiver (86106B)
The 86106B has an integrated, calibrated optical channel with a built-in OC-192/STM-64 filter that can be switched in for a standards-base transmitter compliance test. When the filter is switched out, the 86106B offers 28 GHz of unfiltered optical bandwidth for accurate characterization of high-speed lasers. The frequency-response variation of the unfiltered optical channel also has been improved to minimize the distortion on measured optical pulses. A 40 GHz electrical channel is available for wide-bandwidth measurements on electrical waveforms. 25 GHz optical channel for 9/125 fibers Wavelength range: 1000-1600 nm Characteristic rms noise: 10 uW (22 GHz BW), 18 uW (28 GHz BW) Maximum average input power: 2 mW Reference receiver capability (9.953/10.3125/10.664/10.709 Gb/s) 40 GHz electrical channel with 2.4 mm male input Characteristic rms noise: 0.25 mV (18 GHz BW), 0.5 mV (40 GHz BW) Maximum input signal: +/- 2 Vdc Compatibility 86100C Infiniium DCA-J Mainframe 86100D Infiniium DCA-X Mainframe
Pre-used in good condition.
$7,500.00
Agilent 8156A Optical Attenuator +Option 101 (8156A )
HP Agilent 8156A Optical Attenuator +Option 101 The Agilent 8156A is a high performance optical attenuator for single and multimode optical fiber transmission systems.
Pre-used item in good condition.
$4,000.00
Agilent 8156A Optical Attenuator +Option 101 (8156A)
The Agilent 8156A is a high performance optical attenuator for single and multimode optical fiber transmission systems. Features: 60dB Attenuation Range 0.001dB Resolution 1200nm to 1650nm Wavelength Range HP-IB, GPIB Interface
Pre-used item in good condition.
$4,000.00
Agilent 86109A 30GHz Optical module (86109A )
The 86109A provides the widest bandwidth for measurements of very high-speed optical waveforms. The integrated, calibrated optical receiver allows for easy, precise analysis of optical signals. The flat frequency response provides low-distortion, high-fidelity measurements. An average power meter is built in. The companion electrical channel has over 40 GHz bandwidth. 30 GHz amplified optical channel for 9/125 fibers Wavelength range: 1000-1600 nm Characteristic RMS noise: 15 uW (30 GHz BW) Maximum average input power: 2 mW 40 GHz electrical channel with 3.5 mm male input Characteristic RMS noise: 0.25 mV (18 GHz BW), 0.5 mV (40 GHz BW) Maximum input signal: ± 2 Vdc Compatibility 86100A/B Infiniium DCA Mainframes 86100C Infiniium DCA-J Mainframe 86100D Infiniium DCA-X Mainframe
Pre-used item in good condition.
$7,500.00
Agilent 8156A Optical Attenuator +Option 101 (8156A)
The Agilent 8156A is a high performance optical attenuator for single and multimode optical fiber transmission systems. Features: 60dB Attenuation Range 0.001dB Resolution 1200nm to 1650nm Wavelength Range HP-IB, GPIB Interface
Pre-owned item in good condition.
$4,000.00
Per Page      1 - 5 of 5
  • 1